Fields of Zen

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Lift Plugin  (Read 223 times)

Scorp

  • Site Engineer
  • Newbie
  • *
  • Posts: 382
  • Skype: Scorp_poison
    • View Profile
Lift Plugin
« on: June 07, 2013, 07:27:20 AM »

Ever tire of how long it takes to climb up a loooong ladder? Then you're going to love this! :)
http://dev.bukkit.org/bukkit-mods/lift/

1. First, build your structure that your going to install the lift mod into, you'll need a 3 block height between lift points.
[attachment=11:2ys69tmi]2013-06-16_17.18.09.png[/attachment:2ys69tmi]

2. Next, at the bottom of the lift, you install an iron block at the base/bottom level.
[attachment=10:2ys69tmi]2013-06-16_17.18.26.png[/attachment:2ys69tmi]

3. Then you install a stone button 2 blocks above it, ensuring that you are able to hit it straight on. (At head level)
[attachment=9:2ys69tmi]2013-06-16_17.18.47.png[/attachment:2ys69tmi]

4. Then you place a blank sign above the button with nothing on it, this will be explained later.
[attachment=8:2ys69tmi]2013-06-16_17.19.02.png[/attachment:2ys69tmi]

5. Next, the floor of the next levels above the lift base needs to be glass.
[attachment=7:2ys69tmi]2013-06-16_17.19.10.png[/attachment:2ys69tmi]

6. Here's what it should look like so far! Iron as the base, Button at face height and a Sign above that with Glass as the base for the next level.
[attachment=6:2ys69tmi]2013-06-16_17.19.14.png[/attachment:2ys69tmi]

7. Now onto the next floor!
[attachment=5:2ys69tmi]2013-06-16_17.19.23.png[/attachment:2ys69tmi]

8. Once again, place the button 2 blocks from the ground, at body height for easy access.
[attachment=4:2ys69tmi]2013-06-16_17.19.38.png[/attachment:2ys69tmi]

9. Next, the sign up above the button.
[attachment=3:2ys69tmi]2013-06-16_17.19.52.png[/attachment:2ys69tmi]

10. Now, to explain the sign: You right click it and it'll suddenly have text appear on it! This will show you what your current floor level you are and what your destination floor is. If you have more than two floors, right click the sign will change the destination floor. Note: Have no equipment in your hand when right clicking on the sign initially.
[attachment=2:2ys69tmi]2013-06-16_17.20.00.png[/attachment:2ys69tmi]

11. Go back down to the first level after you make sure the top sign functioned correctly.
[attachment=1:2ys69tmi]2013-06-16_17.20.05.png[/attachment:2ys69tmi]

12. Right click the base sign again and there you go! you don't have to do this with every single floor of your lift levels, but the initial one is the most important. All you do next is hit the button and you get lifted all the way up to the destined floor!
[attachment=0:2ys69tmi]2013-06-16_17.20.07.png[/attachment:2ys69tmi]

If any of that was too confusing (or you think reading sucks), Scorp was kind enough to do a video tutorial too! :) : http://http://youtu.be/9QyNIBOsdEU
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Logged